Hot Plate Stirrer

MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic

MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic
MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic

MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic    MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic

More than 30 Years Experience in Chemical Engineering and Laboratory Instrumentation. Hotplate Stirrer 19x19 cm Ceramic Top Plate with PID Controller and Timer with Digital Display. Laboratory hotplate with integrated magnetic stirrer. Dual controls allow you to adjust the hotplate heating surface temperature and the stirring speed independently. Digital display and control of temperature, stirring speed, and time.

Displays temperature in °C or °F, as required. Temperature control: PID controller of heat output enables the user to maintain the liquid temperature at a specific set point throughout operation time at a high accuracy.

A PID controller continuously calculates an error value as the difference between a desired setpoint and a measured process temperature. Two options of control the fluid temperature: depending on the external sensor or the hotplate surface temperature. Alarm function: alarm can be set to indicate if the temperature has exceeded the set point accidently. Safety function: a maximum value of hotplate temperature can be set to increase the process safety. Two options of temperature reading: hotplate surface temperature or external sensor (actual temperature of liquid); both using Pt100 sensors.

This lab hotplate stirrer comes with: - an external Pt100 temperature sensor made of stainless steel- a support stand with adjustable thermometer/probe holder extends above the hot plate surface - one Teflon coated stir bar. Teflon coated Pt100 sensor; length = 2 m, diameter = 3.8 mm. The dimensions of the square ceramic top plate of model SH-5C is 19cm x 19cm , which is large enough for beakers and flasks up to 5000ml in size. Electricity voltage requirements: 220/240 volt, 50/60 Hz.

Maximum heating plate temperature: 380 °C (716 °F). Stirring capacity: up to 5000ml H 2 O liquid volume.

Heating plate dimensions: square 190mm x 190mm. Heating plate material: ceramic plated.

Overall dimensions (LxWxH): 315mm x 190mm x 120mm. Height with support stand: about 390mm. Displays °C or °F as required. PID controller with auto-tuning function. Digital magnetic stirring speed setting and display. Digital timing setting and display. Standard UK plug, or European standard plug for orders from other European countries; please message us if you need a special type plug. For more lab equipment and other models of hotplate and heating mantle with magnetic stirrer. Other available models of hotplate stirrers (please see our other listings): SH-2, SH-3, SH-4, SH-4C (Hotplate Magnetic Stirrer with digital display and temperature control, and external Pt100 temperature sensor), and SH-5C (same as SH-4C, but with digital control on stirring speed and timer). Digital Temperature, Speed, and Timer, PID Control.

In-doors, room temperature, less than 90% Relative humidity, good ventilation, and no corrosive gases. We are a UK based company specialists in supplying of scientific and laboratory equipment.

Please take a look at the feedback of our customers to evaluate our services. All our equipment is CE marked. Our products are guaranteed and hold our name. Use of equipment for applications other than those normal and known of laboratory magnetic stirrers (mixing and heating of liquids in proper laboratory flasks). You may return the instrument directly to our business address or we may send you spare parts, if applicable, to resolve the problem. You should enclose a copy of the invoice and give reasons of the claim. The item "MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic" is in sale since Friday, March 17, 2017. This item is in the category "Business, Office & Industrial\Medical/Lab Equipment\Lab Equipment\Mixers/Stirrers/Shakers".

The seller is "mese-ltd" and is located in Leeds. This item can be shipped worldwide.

  • Brand: MESE
  • MPN: MESE-SH-5C
  • Unit Quantity: 1
  • Unit Type: Unit


MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic    MESE Digital Hotplate Magnetic Stirrer, PID Controller & Timer, 19x19cm Ceramic